Skip to content

waste collection

Ingenio the ingenious underground waste collection

ingenio underground waste bin collection

MAXIMUM VOLUME, MINIMUM SPACE

Like the tip of an iceberg the ingenio system stores up to 5 metres cubed of waste underground. With a variety of crane hooks at the top along with attractive pedestrial platforms the bins become a welcome addition to the urban space. With fewer collections needed traffic is reduced and one person can efficiently collect several units during the day.

A recent installation at Milton Keynes was photographed showing the different stages.

4m cubed underground bins 1

Stage 1 the bases/troughs for the underground bins are delivered to site.

4m cubed underground bins 2

Stage 2 the concrete sleeves are lowerd into the ground and fixed.

4m cubed underground bins 3

Stage 3 the actual bin bases are delivered ready to be lowerd into the bases shown above.

4m cubed underground bins 4

The final stage is the top and then the underground waste bins are ready for use. In Milton Keynes the site is being used for glass recycling though the Ingenio system has 5 different tops and inserts and a wide range of WRAPS to suit.

INGENIO G5, new generation: the perfect solution for amounts of waste of 3–5 m³. While the refuse is stored underground, only a minimum surface area is required above ground. Single operator can operate the system and due to the larger collection storage the collections can be less frequent.

If you would like to see more details for the Ingenio underground bin system click here.

Underground Waste Management System

Rubbish and Rubble chutes in three different sizes and a myriad of colours to offer a safe and attractive way of getting various items from the top of a building to the bottom where a skip can be sited for easy collection and disposal.

20 Inch – 500 mm Rubbish Chute System

20 inch red rubbish chuteWhen erected this assembly becomes a flexible unit providing a versatile chute system. This system is ideal in situations where a rigid system is impractical. A welded galvanised bracket and chain assembly is supplied as a single unit so chains cannot be lost.

Each chute and side entry section is supplied with a bracket and chain assembly. This system can be provided with a variety of accessories for quick and simple fixing in any situation i.e.from windows,scaffolding or flat roofs.

The taper allows for easy stacking for reducing transport and storage costs.

rubbish chutes nested for transport

20” RUBBISH CHUTE Specification
Dimensions : 1100 mm x 500 mm (top)
1100 mm x 400 mm (base)
Weight : 8.5 Kg
Plastic : Red High Density Polyethylene 5 mm thick (max)
Bracket & Chain x 2 : 90 mm x 60 mm x 5 mm Bracket
c/w 21 links each 60 mm 28 mm x 8 mm
Proof tested to 960 Kg.
Washer x 8 : Zinc coated 38 mm x 10 mm x 1.5 mm
Nut x 8 : Nylon Insert Steel M8, 13 mm x 5 mm
Bolt x 8 : Zinc coated M8 x 25 mm

22 Inch – 560 mm Rubbish Chute System

22 Inch diameter rubbish chute

When erected this assembly becomes a semi-rigid unit providing strength and rigidity minimising damage and dust.

The system is ideal in situations where a versatile system is impractical. A slight taper and increased diameter creates a more durable and essentially dust free system.

Each chute and side entry section is supplied with a wire rope and snap hook assembly which allows for quick and easy connections to scaffolding without the need for additional accessories or frames.

30 Inch 760 mm Rubbish Chute System

Rubbish Chutes

This system is suitable for larger debris which would block narrower chutes.The larger diameter semi rigid chute makes the removal of bulky materials easier as it provides over double the area of standard 20 inch rota chute.

Each chute and side entry section is supplied with a wire rope and snap hook assembly which allows for quick and easy connections to scaffolding without the need for additional accessories or frames. All our designs are available with top hoppers and side entry hoppers suitable for multi level entry use. All chutes for transport and storage are stackable to their design. Universal scaffold frames suitable for all designs are also available.

30” RUBBISH CHUTE Specification
Dimensions : 1225 mm x 770 mm (top)
1225 mm x 670 mm (base)
Weight : 12 kg
Plastic : Black Polythene 2440 mm x 1220 mm x 7 mm c/w
38 mm tapers.
Wire Rope x 2 : 900 mm x 5 mm c/w 5 mm Eyelet at each end.
Proof tester to 960 Kg.
Carbine Hook : 80 mm x 8 mm Zinc Coated
Proof tested to 960 Kg
Washer x 8 : Zinc Coated 30 mm x 10 mm x 1.5 mm
Nut x 8 : Zinc Coated M8, 13 mm x 5 mm
U-Bolt x 2 : Zinc Coated M8 x 25 mm

 

By manufacturing in the UK for quantity we are able to supply rubbish chutes in most colours

Rubbish Chutes

New from Rossignol is the twin refuse sack holders and the innovative Gummy boards a new way to collect chewing gum.

gummy

New Waste Collection