Cotton Mats Special Offer

These border-less absorbent cotton mats have a waffle type backing and provide excellent water absorption at extremely competitive prices.
Available in charcoal grey only, in three sizes as listed.
40x60cm: £ 2.55 + VAT
75x100cm: £ 7.75 + VAT
100x150cm: £ 15.55 + VAT

Carriage Charge £ 7.95 + VAT any Quantity

Ideal safety mat for Wet weather – prevent surfaces becoming dangerous when wet.

Absorbent Cotton Entrance Mat

Cleanroom Partition

Cleanroom partition comes in various standards measured by the number of particles per square foot or metre.  Food and drink is nominally rated at ISO 7 and the lower the number the better the rating.  This cleanroom partition system here can be used for ISO 5 which includes Hospitals and Pharmaceuticals facilities also Aerospace.  The highest classification is ISO 3 used mainly for Micro-Electronics (Based on ISO 14644-1). The Federal 209D standard measures the same way but the equivalent to ISO 3 is Class 1 with this cleanroom partition system Class 100.

Cleanroom partition system

Cleanrooms are a specially designated area where air flow, filters and clothing along with procedures are all required to maintain the correct class.

Toledo CR-2 has been designed specifically for cleanrooms. Its two line junction keeps dust traps to a minimum and its powder coated finish is an ideal surface for clean environments. It is also completely demountable, enabling one panel to be removed without having to dismantle the whole enclosure. All hardware accessories come in stainless steel as standard due to its excellent ‘clean’properties.
Cleanroom theory
This guide is intended to outline the basics of cleanroom construction and how Toledo CR-2 partitions can be used as a part of a complete cleanroom solution.
Maximum performance is obtained by sealing all joints after installation, including perimeters to glazed apertures. Normal applications would be in dry
environments, where Toledo can be cleaned using the specifications.

Cleanroom partition system

Toledo CR-2 is a high quality double skin cleanroom partitioning system, although its versatility allows it to be used in more than just cleanroom applications. Used in conjunction with the correct air handling and HVAC systems, Toledo CR-2 is ideal for working towards an ISO 14644-1 class 5 cleanroom
environment. This is achieved by reducing the number of joints and ledges, using special flush glazing and by utilising coved skirting.
Maximum performance is obtained by sealing all joints after installation, including perimeters to glazed apertures.
Ceilings are formed from a single line junction panel with an optional facility for carrying a person’s weight for maintenance purposes.
Toledo CR-2 can be multi-tiered and profiled for warehouse and office divisions to create a more appropriate environment in specialised areas.

Please consult our sales office for details.

Finish –
TGIC free, and lead free polyester powder coating: Available as standard in the distinctive RAL 9016 white, with anaverage coat thickness of 70 microns. Nonstandard and corporate colours are also available upon request.
Anti-static / electro dissipative, and antimicrobial powder coatings are also available.

Cleanroom partition system

Bicycle Storage

If you require a bicycle rack, store or compound then we have the answer.  From single vertical bike stores to large secure compounds we offer a near infinite choice for bike storage.

If the three most popular cycle storage ranges below do not include your preference Please view the 13 page document here with many more exciting ways to store your bike. Cycle Parking.pdf

Cog Bike Rack

Add some character to your cycle parking with these attractive and innovative range of bike stands. Each rack provides safe parking for
bicycles as it allows the cycle frame and wheel to be padlocked through the rack. In addition, a choice of novel designs allow you to make
a feature of your cycle parking area – choose from Chipmunks, Dolphins, Squirrels, Rockets, Cogs(Shown above) and Cranks. Alternatively, you can
design your own rack to match your organisation’s image.

Bicycle Compound for secure storage

A stylish compound with facilities to house up to 48 bikes. Fitted with a curved roof, made from UV resistant opaque polycarbonate
panels and optional central canopy for extra security and weather protection.

  • Covered shelter for minimum of 16 bikes – larger sizes available to accommodate higher numbers
  • Attractive gate with hasp to take padlock
  • Side panels made from tough clear perspex
  • Optional central security canopy
  • Comes complete with twin level bike racks
  • All metal parts powder coated for improved weather resistance
  • Must be bolted to 250mm thick concrete (fixings included)
  • Delivered in knock-down form

Vertical Bike store

Vertical Bike Lockers are a revolutionary new way of storing bikes securely. They come with an innovative patented mounting hoop that allows the bike to be parked upright. As the bike is vertical, 35-45% of floor space is saved compared with horizontal cycle storage.
Bike Lockers provide space and security not only for your bike but for your cycle clothing, helmet and luggage as well.
Innovative space saving design that stores the bike vertically on its rear wheel
Fitted with a patented mounting hoop that uses gravity to hold the bike upright
Completely encloses the bike protecting it from thieves, vandals, the weather and bird strikes
Manufactured to the Quality Cycle Locker Standard devised by the Bike Parking and Security Association (BPSA) to meet planning application requirements
Constructed from heavy duty galvanised steel, powder coated green. Other colours available on request, subject to minimum order requirements
Comes with disc padlock and three 10mm bolts for mounting into concrete
Space to store a helmet and cycle gear inside

These Quality Cycle Lockers must:
• Be easy and convenient to use
• Be easy to clean and maintain
• Protect the cycle by fully enclosing it
• Not cause damage to the bike, user or others
• Protect the cycle from extreme weather
• Resist forced entry for minimum of 2 minutes
• Withstand vandalism including kicking
• Accommodate 90% of bike designs

If the three most popular cycle storage ranges above do not include your favourite Please view the 13 page document here with many more exciting ways to store your bike. Cycle Parking.pdf